Benchmark DAC1 HDR Instrukcja Obsługi Pobierz pdf (Strona 13)

DAC2 Series Instruction Manual Rev C Page 13

Input Status Display

The DAC2 HGC and DAC2 L have sixteen

LED status indicators on the front panel.

The DAC2 D has fourteen LED status

indicators on the front panel.

Basic LED Explanation:

DIM/MUTE – A solid red LED indicates that

the unit is in DIM mode. A flashing red LED

indicates that the unit is in MUTE mode. If the

DIM/MUTE LED is not illuminated, then

neither the DIM or MUTE function is engaged.

Holding down the DIM/MUTE button will

engage or disengage the Home Theater

Bypass (DAC2 HGC and DAC2 L model only)

(HT).

POLARITY – Yellow LED indicates that the

polarity is switched

A1 – A solid blue LED indicates analog input 1

is selected. (DAC2 HGC and DAC2 L model

only)

A2 – A solid blue LED indicates analog input 2

is selected. (DAC2 HGC and DAC2 L model

only)

U – The blue blinking LED indicates no signal

is transmitted to USB input. A solid blue LED

indicates a signal is being transmitted to USB

input.

D1 – The blue blinking LED indicates no

signal is transmitted to optical digital input 1

or data transmitted is incompatible. A solid

blue LED indicates a signal is being

transmitted to optical digital input 1.

D2 – The blue blinking LED indicates no

signal is transmitted to optical digital input 2

or data transmitted is incompatible. A solid

blue LED indicates a signal is being

transmitted to optical digital input 2.

D3 – The blue blinking LED indicates no

signal is transmitted to coaxial RCA digital

input 3 or data transmitted is incompatible. A

solid blue LED indicates a signal is being

transmitted to coaxial RCA digital input 3.

D4 – The blue blinking LED indicates no

signal is transmitted to coaxial RCA digital

input 4 or data transmitted is incompatible. A

solid blue LED indicates a signal is being

transmitted to coaxial RCA digital input 4.

Note: if D4 is not selectable by not lighting

up, it indicates that the Digital Pass

Through is engaged.

HT – When you choose an input to engage

Home Theater Bypass or High Throughput

mode using the analog inputs, the HT yellow

LED will blink and then turn solid when it is

engaged. When the HT yellow LED is lit, it is

accompanied by a blue lit LED on either A1

(DAC2 HGC and DAC2 L model only), A2

(DAC2 HGC and DAC2 L model only), U, D1,

D2, D3, or D4.

24 – The solid blue LED lit indicates that the

word-length is 24 bits. If the 24 LED and the

16 LED are on at the same time, this

indicates that the word-length is between 17-

23 bits.

16 – The solid blue LED lit indicates that the

word-length is 16 bits. If the 24 LED and the

16 LED are on at the same time, this

indicates that the word-length is between 17-

23 bits.

44 – The solid blue lit LED indicates that the

sample rate is 44 kHz.

48 – The solid blue lit LED indicates that the

sample rate is 48 kHz.

2X – The solid blue lit LED indicates that the

multiplier is used in conjunction with either

44 to indicate 88.2 kHz or 48 to indicate 96

kHz. If both the 2X and the 4X LEDs are lit,

this indicates that the signal coming into the

DAC is DSD.

4X – The solid blue lit LED indicates that the

multiplier is used in conjunction with either

44 to indicate 176.4 kHz or 48 to indicate

192 kHz. If both the 2X and the 4X LEDs are

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 66 67

Komentarze do niniejszej Instrukcji

Brak uwag